article ul Go to Cart         dk

 

MS-2800-1/64

MS-2800-1/64

MS-2800-1/64
1480924919_ms_web_front.jpg
1480924919_ms_web_back.jpg

Embedded CPU ARM9-400MHz, Linux-based firmware, 8 MB flash, 64 MB SDRAM, Micro SD Flash adapter, 2 x USB host, 1 x USB device, RS-232, RS422/RS485, 8 digital inputs, isolated, 8 digital outputs, isolated, 16 analog inputs (-10V to +10.0V), Ethernet 10/100Mpbs, PSU, UPS/LI-on charger

€ 436,00

Overview

 

Datalogger with telemetry (GPRS) and positioning (GPS) options

 

Micronix MS-2800-1 is an embedded ARM9 system based on Atmel’s AT91SAM9G20 microcontroller. A combination of a power supply/charger for an external Li-Ion battery, a GSM/GPRS modem, a GPS receiver, analog and digital I/O and Ethernet makes this module very useful in many standalone applications. The Nanobird series (MS-2800) uses Telit’s quad band (900/950/1800/1900MHz) cellular engine and a SiRFstarIIITM single chip GPS receiver. The modem is controlled by AT commands, supported by an on-board UART, and is fully compatible with the AT command set.

 

The power supply can be backed-up by an external Li-Ion battery. An built-in charger will insure that the battery is fully charged. MS-2800-1 has 16 isolated analog (-10V to +10.0V) inputs, enabling data acquisition with a resolution up to 24bits directly on-board. 8 digital inputs and 8 digital outputs (all opto-isolated) allowing the user to control auxiliary equipment. Wireless communication can be obtained using the GPRS/SMS feature on the GSM/GPRS modem.

 

The SIM card is secured in a push & push SIM card socket placed on a GSM/GPRS/GPS sub module.


Micronix MS-2800 Series represents the latest development within GSM/GPRS technology and holds all the necessary approvals (R&TTE and GCF). The MS-2800 is ideal for data logging and alarm systems. The MS-2800 withstands extended temperatures, shock and vibration of mobile equipment

 

For further details, please check out the technical specifications or use our RFQ-form (Quote) for pricing inquires. For other specific inquiries, you can contact our sales engineers:  This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

Specifications

 

    • 400 MHz ARM9 based microcontroller (AT91SAM9G20)

    • 64 MB on-board SD RAM

    • 8 MB on-board Flash

    • Micro SD Flash slot (Cards up to 32GB)

    • Quad-band modem 900/950/1800/1900MHz (optional)

    • SiRFstarIIITM single chip GPS receiver (optional)

    • GPS data via UART port (optional)

    • 2 x USB 2.0 Full Speed (12 Mbps) host

    • 1 x USB 2.0 Full Speed (12 Mbps) device

    • RS232 using a DSUB9 connector

    • Ethernet 10/100Mbps

    • RS485 or RS422 using two modular jacks (6/6)

    • Build-in UPS/LI-on charger

    • 8 digital inputs, opto-isolated

    • 8 digital outputs, opto-isolated

    • 16 isolated analog inputs (-10V to +10.0V), 24-bit sigma-delta A/D converter

    • Web interface for all setup/maintenes/dataacces

    • Linux installed

    • Ultra low power consumption

    • Support extended operating temperature range of -20°C to +70°C

       

 

 

Downloads

 

Datasheet - ds_ms-2800.pdf

 

User manual -  This email address is being protected from spambots. You need JavaScript enabled to view it.

 

USB Driver for Windows - sbc2800.inf

 

 


 

 

RFQ


 

Fill in your details below to receive a non-obligation quotation for this product. All inquiries will be replied within 2 working days. 

 

Required
Required
Required
Required
Required
Required
10-24
25-49
50-99
100-249
250-499
500-999
1000+
Required
EUR
USD
Required
Within 2 weeks
Within 1 month
Within 3 months
Within 6 months
Required
Required
Are you human ? What is 937 + 740 ?

 

 

 

8 8 16 x ±10V Yes

Shopping cart

0 Your Cart

Contact us

mann

Contact us

If you have questions or inquiries, we are here to help you:

 

Call +45 6615 3000

This email address is being protected from spambots. You need JavaScript enabled to view it.

Change currency